AutoCAD Test Online

Q: How can I prepare for AutoCAD Test Online?

You can prepare for AutoCAD Test Online by attempting the free online quizzes at Gotest.com.pk. We provide instant results, performance reports, and detailed explanations for every question.

Question 1

1. The purpose of the UCSICON command is to?

Answer

Provide a working plane to draw on

Answer

Permit a user to redefine the location of 0,0.

Answer

Permit a user to move the UCS system

Answer

Permit a user to control the placement and appearance of the icon to help you understand your orientation in the XYZ coordinate system

Question 2

2. Which one of the following AutoCAD objects can NOT have a 3D (Z) thickness property applied to it?

Question 3

3. You have just created an interesting new round object by using REVSURF to revolve a complex curve around an axis. However you find there are only 6 faces around the perimeter leaving it very rough looking. What variable do you change to correct this?

Answer

Set TABSURF1 to 18

Answer

Set SPLINESEGS to 12

Answer

Set SURFTAB1 to 18

Answer

Set TABSURF2 to 18

Question 4

4. Which of these objects will only draw flat on the current XY working plane and not allow 3D coordinate input (e.g. Z input)?

Answer

3DPOLY, LINE

Answer

DONUT, CIRCLE, PLINE

Question 5

5. By what symbol shows the snap point to the closest point?

Answer

With Diamond

Answer

With two triangle

Answer

With three orthogonal

Answer

with circles and dots in the center

Question 6

6. The primary purpose of the UCS (User Coordinate System) is?

Answer

Helps a user to calculate the area of an object.

Answer

Allows a user to select the desired type of drawing units.

Answer

To determine angles for isometric projections.

Answer

Allows a user to draw on a specified 2D Plane in 3D space

Question 7

7. You apply a property called Thickness to a standard AutoCAD CIRCLE. What type of AutoCAD object do you now have officially?

Answer

Surface Model (Polygon Mesh)

Answer

Solid Model (3D Solid)

Question 8

8. The right-hand rule is used to determine the direction of the ______?

Answer

negative X axis

Answer

positive X axis

Answer

negative Y axis.

Answer

positive Z axis.

Question 9

9. When to fix a block attribute?

Answer

Before you fix the block

Answer

After fix the block

Answer

No matter the number

Answer

When I make the block

Question 10

10. The axis used to show depth in AutoCADÂ® is the______?

Question 11

11. The primary difference between the Model tab and the Layout tab(s) is ____?

Answer

The color of the background

Answer

The Model tab is used for drawing in 3D and a Layout is used for drawing in 2D

Answer

The Model tab is where you create the drawing and a Layout tab represents the sheet that you will plot or print on

Answer

The Model tab displays the drawing you are copying from and the Layout tab is where you lay out the new drawing

Question 12

12. You want to draw an octagon shape window on a vertical wall face in your 3D House Plan. Which UCS command option is best suited to place your User Coordinate System on this front wall face to ensure the window is placed flat on this wall?

Question 13

13. What is the volume of a cone with a 12′ radius and a 12′ height?

Answer

3,126,195.13 cu in

Answer

3,126,915.13 cu in

Answer

3,126,951.13 cu in

Answer

3,162,915.13 cu in

Question 14

14. What you cannot create from the command Offset?

Answer

Vertical straight

Answer

Concentric circles

Answer

Three parallel lines

Answer

Parallel arcs

Question 15

15. Which of the following is NOT a property of an object?

Answer

Line weight

Question 16

16. All of the axes in the 3D coordinate system meet at?

Answer

60Â° angles.

Answer

120Â° angles.

Answer

135Â° angles

Answer

90Â° angles.

Question 17

17. What is the usefulness of viewports?

Answer

Allows us to see the screen or on paper different views of the same project

Answer

None of the above

Answer

We can make a change in one part of the plan, without affecting the rest

Answer

Give us the ability to see projects have become a newer version of AutoCAD from our

Question 18

18. To determine if two parts (3D Solids) will fit together without any interference, what 3D AutoCAD command would you use?

Question 19

19. Which command convert discrete objects in polyline?

Question 20

20. To print the entire project, you will choose to regulate what to plot?

Question 21

21. You have just issued the HIDE command on a new 3D House Plan to see how the design looks, but find that all of the interior room labels are showing through your opaque walls, ruining the 3D effect. What can you do with the TEXT objects to fix this?

Answer

Place the TEXT on the Defpoints layer.

Answer

Assign a thickness of 0.001″ to all TEXT.

Answer

Place the TEXT on a no plot layer.

Answer

Assign the Hide property to all TEXT.

Question 22

22. When drawing in 2D, what axis do you NOT work with?

Question 23

23. What is the difference between the Scale command from the command Zoom?

Answer

No difference

Answer

H Scale can grow / shrink a shape up 10 times, while the Zoom has no limits

Answer

H Scale changes the size of objects, while the Zoom changes the visibility of the project

Answer

Scale for single object, while the Zoom whole plan

Question 24

24. In AutoCADÂ®, all objects are drawn on the?

Question 25

25. Which AutoCAD command will determine precisely the volume of a complex (or simple) 3D Solid part?

Question 26

Loading...

Total Questions:	25
Time Allowed:	10 Minutes
Total Marks:	25
How to Attempt Test:	Please choose the right Option in MCQ-type question.
Test Helpful For:	Computer Test Competitive exam Forces test Fpsc Entry test Recruitment test

AutoCAD Test Online

AutoCAD Test

AutoCAD Test Practice Online

Study Plan for AutoCAD Test Online

How to Use GoTest for Preparation:

More Related Resources

Maan Ali

Leave a Reply Cancel reply